These have been designed for supplying clean water to homes, small farms, sprinkler irrigation systems and pressurisation equipment. All parts in contact with water are made of AISI 304 stainless steel, except for the spray nozzles, which are made of thermoplastic.
The motor is manufactured such as to allow effective cooling in the whole range of pumping flows, thanks to its double inner jacket and the special way the top sealing body and the double mechanical closure are achieved. The compact design of the pump allows effective cooling of the motor even if it is installed in open wells, tanks or ponds; it has also been designed so that its suction via the bottom enables better exhaustion of the suction tank.
In drilling installations it allows the exploited dynamic level to be increased.
It is remarkable for its compatibility, including an ESD variable speed control module for automating its operation according to criteria of energy savings and installation efficiency. It is especially recommended for pressurisation at constant pressure.
SERIES FEATURES ACUARIA 17
Equipment
- Check valve: No
- Draining plug: No
- Fittings: Not included
- Pre-filter: Included
Manufacturing characteristics
- Discharge connection type: Nut
- Discharge diameter: 1″ G
- Impeller type: Closed
- Minimum well diameter: 140mm
- Motor cooling: Water
- Solid passage (mm): 2
- Stages: Multi stage centrifugal pump
- Tightness by: Double Mechanical Seal
Usage limits
- Liquid temperature (ºC): Min: 4 – Max: 35
- Maximum no. of motor start-ups (start-ups/minute): 0.5
- Maximum submersion (m): 50
Electrical characteristics
- Electrical isolation: F Class
- Motor speed operation: Constant speed
- Motor type: Asynchronous
- Protection rating: IP68
- Reset: Automatic
- Service factor: S1
- Service type: Continuous
Materials
- Diffuser: PPO + 30% GF
- Discharge body: Stainless steel Aisi 304
- Gaskets: NBR
- Impeller/s: Stainless steel AISI 304
- Mechanical seal: Aluminium-Graphite/Graphite – Steatite
- Mechanical seal bracket: Stainless steel AISI 304
- Motor casing: Stainless steel AISI 304
- Motor shaft: F114
- Nuts and bolts: Stainless steel AISI 304
- Outer pump body: Stainless steel AISI 304
- Pre-filter: Stainless steel AISI 304
- Pump shaft: AISI 431
- Suction body: Stainless steel AISI 304
Reviews
There are no reviews yet.